1×1 Hole 6mm
A 1×1 cover with a hole of 6mm for a switch or button.
Download the STL file: Cover 1×1 Hole 6mm.stl
1×1 Hole 7 mm
A 1×1 cover with a hole of 6mm for a switch, button, or rotary encoder.
Download the STL file: Cover 1×1 Hole 7mm.stl
1×1 Hole 12mm
A 1×1 cover with a hole of 12mm for a big switch.
Download the STL file: Cover 1×1 Hole 12mm.stl
1×1 Micro servo
A 1×1 cover to mount a micro servo.
Download the STL file: Cover 1×1 Micro Servo.stl
1×1 Oled Display
A 1×1 cover to mount an Oled Display. The display is held in place with a little bit of hot glue.
Download the STL file: Cover 1×1 Oled Display.stl
1×1 Round Display (0.96 Inch 240*198 ST7789)
A 1×1 cover to mount a round 0.96 Inch 240*198 ST7789 display. The cover has built-in support, so you don’t need to add that in your slicer. The display has 2,5 mm holes and the cover has holes for M2,5 screws.
Download the STL file: Cover 1×1 Round Display.stl
Cover 2×1 Volt Meter
A 2×1 cover to mount a Volt Meter display.
Download the STL file: Cover 2×1 Volt Meter
2×1 Power Plug C14 socket
A 2×1 cover to mount a Powerplug C14 socket. This does not fit with an Extender. Be careful with mains power. Only use this when you know what you are doing!
Download the STL file: Cover 2×1 PowerPlug.stl
2×2 E-stop
A 2×2 Cover to mount an E-Stop. This does not fit with an Extender.
Download the STL file: Cover 2×2 E-Stop.stl
2×2 Joystick
A 2×2 Cover to mount a Joystick. This does not fit with an Extender.
Download the STL file: Cover 2×2 Joystick.stl
